Chemical fertilizer are made from synthetic source of nutrients designed to stimulate plant growth, such as nitrogen (N), phosphorous (P2O5 )and potassium (K2O). Many formulas also contain iron, sulfur, cooper and other trace elements. Chemical fertilizers are designed to meet those needs. It is the easiest form of nutrients to apply. They come in many different combinations of ingredients. Commercial formulated chemical fertilizers allow you to know exactly which nutrients you’re giving your plants, rather than guessing at the composition of organic formulas because sometime nutrients in the soil may not be readily available to them then the plant’s growth or appearance then suffers.

7
Yes
None
1
1000000
Search...
/chemical-fertilizer/

Chemical Fertilizer

Thumbnail

Categories:

DTPA Fe 11%
DTPA Fe 11% Image

DTPA Fe 11%

Suitable for Soil, Foliar, Hydroponics and Aquaponics

DTPA chelated Iron / Fe is a DTPA chelating agents and divalent iron chelation formed a chelated iron fertilizer. Iron deficiency is a limiting factor of plant growth. Iron is present at high quantities in soils, but its availability to plants is usually very low, and therefore iron deficiency is a common problem. This product is suitable for fertigation and soilless technique of crops grown at slightly alkaline conditions. It’s provide excellent efficiency to plants when applied by fertigation, aquaponics and hydroponics or for the prevention and correction of iron deficiency in crops.

Advantages of DTPA Fe / Iron:
1. Product available as DTPA Fe
2. High stability in wide pH solution range
3. High bio-availability
4. Environmental green
5. Organic fertilizer
6. Excellent solubility in water
7. Especially suitable for high loving acid plants.
8. For direct use in fertigation and soilless technique and foliar fertilizer.
9. Recommended mostly for slightly alkaline soil and water conditions such as hard water (High contents of Calcium & Magnesium), Hydroponics and Aquaponics.

 

What is the difference between DTPA chelated Iron / Fe and inorganic Iron fertilizers?
1. DTPA chelated Iron / Fe is a good chemical stability, less susceptible to oxidation or reduction.

2. DTPA chelated Iron / Fe can mix with phosphates, carbonates fertilizer and formulated nutrient solution.

3. DTPA chelated Iron / Fe compatible with many herbicides, pesticides and other product.

4. DTPA chelated Iron / Fe is non-corrosive, it does not burn the leaf surface or root wilting. This is more environmentally safe.

5. DTPA chelated Iron / Fe solubility is significantly greater than inorganic iron salts. In hard water (High content of Calcium & Magnesium) or cold water, it can quickly dissolved completely, but inorganic iron salts substances will clog up filters and nozzles. Therefore, DTPA chelated Iron / Fe is more suitable for modern agriculture hydroponics and aquaponics system.

6. The inorganic ferrous sulfate easily oxidized, large amount of usage, low absorption rate, extensive use of inorganic ferrous sulfate will cause soil acidification. Another frequent use of ferrous sulfate, it will produce sulfuric acid crystals clogging the pores seedling roots eventually will cause the plants cannot absorb soil nutrients and water can result in death.

 

Is the second trace element content of the product the higher the better?
Not necessarily, content is only one level of technical indicators. As for plants, absorption and utilization is the key. Such as pure copper block, iron content is 100%, content of iron but the plants cannot absorb and inorganic salts can only partially absorbed. DTPA chelated Iron / Fe content element looks only about 11%, but the structure and characteristic is stable. Therefore, it’s not easily be destroy before they are absorbed by plants and the absorption rate is around 95% -100%.

DTPA chelated Iron / Fe suitable for what kind of soil and crop?
DTPA chelated Iron / Fe suitable soil conditions for the pH value of 7.0 or less. It is particularly suitable for high loving acidic soil and high loving acid plants.

 

DTPA Iron / Fe can be used to water plants?
It can be used to water plants. Most of the water plants the iron content is minimal, iron deficiency can affect the existence of chlorophyll and will also cause leaf chlorosis. Commonly used iron fertilizer plants are mainly ferrous sulfate, but ferrous ion in water oxidized into ferric ions and plants will have difficulties to absorb. The DTPA Iron / Fe is chelated iron more stable than EDTA Iron, less susceptible to oxidation and better absorption to plants. For most of the aquarium like acidic water quality, a low concentration of DTPA Iron / Fe is an ideal iron supplementation effect for water plants.

 

DTPA Iron / Fe Product Specifications:
Properties
Iron / Fe content; 11.00 %
Chelated iron / Fe purity: 99.90 %
pH value: 2.0 – 4.0 (1% solution)
Suitable soil pH range below 7.0
Suitable water pH range : below 7.0
Appearance: Yellow brown powder
Origin: Germany

 

Application Rate:
1. For foliar spray:
Dilution ratio: 1gm mix with 1 – 2.5 L of water.
Application frequency: 2 – 3 times a month, once every 7 – 10 days.
According to the plant severity of symptoms, use 3 – 5 grams of chelated Iron / Fe per square meter. Due to the DTPA chelated Iron / Fe absorption rate is high, once the plant recover to normal condition, do not excessive application.

2. For hydroponics or aquaponics:
Dilution ratio: 20 gm – 100 gm mix with 1000 L of water or 0.02gm – 0.1 gm mix with 1 L of water.

 

Precautions:
1. Avoid mixing with strong acids, alkaline substances and oxidants.
2. Avoid use under bright sun light.
3. Sealed and keep in dry place at room temperature.
4. Keep out of children reach.

 

Packing: 250gm per packet.

EDDHA Fe 6%
EDDHA Fe 6% Image

EDDHA Fe 6%
Suitable for Soil, Foliar, Hydroponics and Aquaponics

EDDHA Chelated Fe / Iron
EDDHA is a strong chelating agent and with metal ions, together they form stable chelate salt. Compare with the DTPA and EDTA, EDDHA is high stability in wide pH solution range. Is the highest bio-availability EDDHA O-O isomer molecule and it is also the top products in chelated iron. EDDHA Chelated Fe / Iron is an EDDHA chelating agents and divalent iron chelation formed a chelated iron fertilizer. EDDHA Fe are the only effective way of correcting iron deficiency in alkaline soils because they are the only iron compounds stable enough to remain in solution in these conditions.

This product is suitable for fertigation and soilless technique of crops grown at slightly alkaline conditions. It’s provide excellent efficiency to plants when applied by fertigation, aquaponics and hydroponics or for the prevention and correction of iron deficiency in crops.

 

Iron deficiency – The problem
Iron is necessary for the formation of chlorophyll, which is responsible for the green color in plants and necessary for photosynthesis (sugar production in plants). Any reduction in chlorophyll during the growing season reduces plant growth, vigor, and tolerance to stress conditions. Plants with reduced vigor from iron chlorosis are more prone to winter injury and winter injury may aggravate an iron chlorosis problem. Weakened plants also are more susceptible to other diseases and insect infestations

When provided with insufficient quantities of Fe, organisms will suffer from Fe deficiency symptoms. Fe deficiency is a worldwide problem in crop production, affecting yield both qualitatively and quantitatively; plants do not reach their full growth potential, and the nutritional value is compromised, leading to economic losses and limitations in crop selection.

Iron is not very mobile within plants. Plants use their stores of iron in new leaves as they create them so iron chlorosis shows first and more severely on the newer growth at branch tips. Leaves may be smaller than normal. Leaves may eventually curl, dry up, and fall. Fruits may be small with a bitter flavor. Mildly affected plants become unsightly and grow poorly. In severe cases individual limbs or the entire plant may die.

 

Advantages of EDDHA Iron / Fe:
• Product available as EDDHA Fe
• High stability in wide pH 3 – 11 solution range
• High bio-availability
• Prevention and treatment for plant iron deficiency
• Environmental green
• Organic fertilizer
• Excellent solubility in water
• Especially suitable for high loving acid plants.
• For direct use in fertigation and soilless technique and foliar fertilizer.
• Recommended mostly for slightly alkaline soil and water conditions such as hard water (High contents of Calcium & Magnesium), Hydroponics and Aquaponics.

 

What is the difference between EDDHA chelated Iron / Fe and inorganic Iron fertilizers?
• EDDHA chelated Iron / Fe is a good chemical stability, less susceptible to oxidation or reduction.
• EDDHA chelated Iron / Fe can mix with phosphates, carbonates fertilizer and formulated nutrient solution.
• EDDHA chelated Iron / Fe compatible with many herbicides, pesticides and other product.
• EDDHA chelated Iron / Fe is non-corrosive, it does not burn the leaf surface or root wilting. This is more environmentally safe.
• EDDHA chelated Iron / Fe solubility is significantly greater than inorganic iron salts. In hard water (High content of Calcium & Magnesium) or cold water, it can quickly dissolved completely, but inorganic iron salts substances will clog up filters and nozzles. Therefore, EDDHA chelated Iron / Fe is more suitable for modern agriculture hydroponics and aquaponics system.
• The inorganic ferrous sulfate easily oxidized, large amount of usage, low absorption rate, extensive use of inorganic ferrous sulfate will cause soil acidification. Another frequent use of ferrous sulfate, it will produce sulfuric acid crystals clogging the pores seedling roots eventually will cause the plants cannot absorb soil nutrients and water can result in death.

 

Is the second trace element content of the product the higher the better?
Not necessarily, content is only one level of technical indicators. As for plants, absorption and utilization is the key. Such as pure copper block, iron content is 100%, content of iron but the plants cannot absorb and inorganic salts can only partially absorbed. EDDHA chelated Iron / Fe content element looks only about 6%, but the structure and characteristic is stable. Therefore, it’s not easily be destroy before they are absorbed by plants and the absorption rate is around 95% – 100%.

 

EDDHA chelated Iron / Fe suitable for what kind of soil and crop?
EDDHHA chelated Iron / Fe suitable soil conditions for the pH value of 10.0 or less. It is particularly suitable for high loving acidic soil and high loving acid plants.

 

EDDHA Iron / Fe can be used to water plants?
It can be used to water plants. Most of the water plants the iron content is minimal, iron deficiency can affect the existence of chlorophyll and will also cause leaf chlorosis. Commonly used iron fertilizer plants are mainly ferrous sulfate and EDTA Fe, but ferrous ion in water oxidized into ferric ions and plants will have difficulties to absorb. The EDDHA Iron / Fe is chelated iron more stable than EDTA Iron, less susceptible to oxidation and better absorption to plants. For most of the aquarium like acidic water quality, a low concentration of EDDHA Iron / Fe is an ideal iron supplementation effect for water plants.

 

How to determine whether a plant iron deficiency?
Iron deficiency symptoms refers to a yellowing caused by an iron deficiency in the leaf tissues. The primary symptoms of iron deficiency include interveinal chlorosis, i.e., a general yellowing of leaves with veins remaining green. In severe cases, leaves may become pale yellow or whitish, but veins retain a greenish cast. Angular shaped brown spots may develop between veins and leaf margins may scorch.

 

EDDHA Iron / Fe Product Specifications:
Iron / Fe content: 6.00 %
Chelated iron / Fe purity: 99.00 %
Chlorine content: 0.10 %
pH value (1% solution): 7.0 – 9.0
Suitable soil pH range: 3.0 – 10.0
Suitable water pH range:3.0 – 11.0
Water Solubility: 60g / L (20°C)
Appearance: Dark Brown Powder
Origin: Germany

Packing: 250 gm per Packet

EDTA Chelated Calcium
EDTA Chelated Calcium Image

EDTA Chelated Calcium

Secondary Element Fertilizer

Suitable for Vegetables, Fruits & All ornamentals

Calcium exists a large number in leaves, normal concentration is around 0.2 – 1.0%. The physiological function of calcium is related to cell wall components. Calcium can stabilize the cell membrane, cell wall, also involved in the second messenger transmission, regulating osmotic effect, and enzymatic effect.

Plants require calcium for proper growth because calcium is essential for the development of strong cell walls. The element is also used in cellular signaling, a biological process critical to a plant’s healthy development.

 

Benefits of EDTA Chelated Calcium
• Non-toxic
• 100% soluble in water
• EDTA chelate calcium is high in stability
• High absorption efficiency, specifically for plant calcium deficiency.
• Improve plants resistance to disease resistance
• Plants more robust and dark green leaves
• Improve fruits quality, sweetness and hardness of fruit,
• Extend the fruits storage period and shelf life

 

What are the advantages of EDTA Calcium compare with normal inorganic calcium fertilizer?
EDTA chelated calcium is more stable than normal inorganic calcium fertilizer, high absorption rate, wastage rate greatly reduced, improve fertilizer efficiency by 15 – 30%, and to prevent antagonism with other elements.

 

Is the content of the product the higher the better?
Not necessarily, content is only one level of technical indicators. As for plants, absorption and utilization is the key. Such as pure copper block, iron content is 100%, content of iron but the plants cannot absorb and inorganic salts can only partially absorbed. EDTA chelated Calcium content element looks only about 10%, but the structure and characteristic is stable. Therefore, it’s not easily be destroy before they are absorbed by plants and the absorption rate is around 95 – 100%.

 

Suitable for
It is suitable for most field crops, vegetables, aquatic plants, seedlings, fruit trees, flowers, drip irrigation, green houses and nursery plants.

 

Calcium Deficiency Symptoms
Acidic, sandy, or coarse soils often contain less calcium. Uneven soil moisture and overuse of fertilizers can also cause calcium deficiency. At times, even with sufficient calcium in the soil, it can be in an insoluble form and is then unusable by the plant or it could be attributed to a “transport protein”. Soils containing high phosphorus are particularly susceptible to creating insoluble forms of calcium.

Calcium deficiency symptoms appear initially as localized tissue necrosis leading to stunted plant growth, necrotic leaf margins on young leaves or curling of the leaves, and eventual death of terminal buds and root tips. Generally, the new growth and rapidly growing tissues of the plant are affected first. The mature leaves are rarely if ever affected because calcium accumulates to high concentrations in older leaves

 

EDTA Chelated Calcium Product Specifications:
1. Calcium content: ≥ 10.00 %
2. pH value: 5.50 – 7.50
3. Purity: ≥ 99.00 %
4. Solubility: 100% water soluble
5. Appearance: White

 

Application Rate
For general use:
•Foliar spray: 1g mix into 1.50 – 2.50 L of water.
•Soil drenching & drip irrigation: 1g mix into 1.00 – 1.50 L of water.

Application frequency: 1 month 2 – 3 times, every 7 – 10 days apply once. Due to the EDTA Chelated Calcium absorption rate is high, please stop apply when the plant recover to normal condition, do not excessive.

For aquatic plants
1.10 – 15gm mix into 1L of water (As a Solution A).
2.Each time use 10 – 15ml of the Solution A (Apply when plants suffered from calcium deficiency).

 

Precautions:
• Sealed and keep in dry place at room temperature.
• This product cannot mix with strong acidic & alkaline products.
• Keep out of children reach.

Packaging: 250gm

EDTA Fe 13%
EDTA Fe 13% Image

A soluble powder formulation of Iron Chelate (ethylene diamine tetracetate disodium salt) containing water soluble Fe of 13% w/w. This product contains water soluble iron in EDTA chelated form which provides iron nutrient essential for plant growth. Its use will prevent iron deficiency and it is suitable for hydroponics and foliar.

Improve all fruits color and color of flowers, such as Jambu batu, jambu air, tomato, cucumber, ciku, banana, roselle and others.

Uses
1. For the correction of iron deficiency in many agricultural, horticultural and fruit crops. Recommended for foliar application.

2. As a iron source in hydroponics and other nutrient solution.

3. EDTA Fe 13% (Iron chelate) should be applied where there is a recognized need. Do not exceed the appropriate dose rate,

4. It is compatible with all other crop care chemicals. They are also fully compatible with solutions containing soluble phosphates such as foliar fertilizer.

Rates of application:
Hydroponics
First check the pH of the nutrient solution and if necessary adjust this to 5 – 6, then add EDTA Fe 13% at the rate of 20 grams per 1000 litres of the nutrient solution.

Foliar application
The amount of EDTA Fe 13% to be applied should be mixed with a volume of water appropriate to the crop leaf area not exceeding a solution concentration of 0.1% or 100 grams per 100 Liters water. Coat the leaves add stems with a thin film of moisture with little or no run-off in the late afternoon. Spray to 2 times, Before flowering and after fruits formation.

Packing: 500gm Bag

EDTA Micronutrient Fertilizer
EDTA Micronutrient Fertilizer Image

EDTA Chelated Multi – Micronutrient (Trace Element) Fertilizer

Characteristics and advantages
EDTA Chelated micronutrients are important in agriculture because they are more readily utilized by plants than are inorganic forms of metals and they remain in plant-available form longer because the chelated structure slows the micronutrient reaction with soil minerals.

The product is non-toxic, harmless, it can be used as foliar fertilization, soilless culture fertilizer and direct soil application, mixed with other fertilizers, complex fertilizer or organic fertilizer to ensure the comprehensive nutrition and improve the overall effect. It’s more convenient for transportation compared with liquid fertilizer products. Therefore using chelated micronutrients can reach surprised effect.

 

Usage
The product can regulate the nutrition function of plant organs, resist the deficiency diseases like small leaves, yellow leaves, falling flower, fruit drop, significant improving after 2-4 days usage. Applied plants will be observed in state of flourished branch, earlier blooming, more fruits setting, less diseases, high quality and yield.

 

Benefits
1. High purity of raw materials, which makes the fertilizer suitable for foliar application
2. Micro nutrients contents are quickly up taken by leaf and roots tissues
3. Nutrients are presents in forms quickly available for the plants
4. High Magnesium content
5. Prevents and cures micro nutritional disorders
6. Optimal well-balanced plant nutrition
7. Improves color, sweetness, consistency and increasing size of fruits
8. Promotes all the Biochemicals plant’s processes which need
9. Higher yields

 

Application and dosages
1. By foliar spray, apply at the following dosage and repeat every 10-15 days if needed:
1.1. Fruit trees: 150-200 gm/100 litres of water – at the reawakening, in blossoming and after fruit setting.
1.2. Vegetable crops: 100-150 gm/100 litres of water – from the first vegetative phases.
1.3 Flowers and ornamentals: 100-150 gm/100 litres of water – from the first vegetative phases.

2. Industrial crops: 2-2.5 Kg/Ha – from the first vegetative phases.

3. Fertigation: The dosage depends from needs and can vary from 15 to 25 Kg/Ha.

 

Product Specification
1. Boron (as B): 0.50%
2. Cobalt (as Co): 0.05%
3. Copper (as Cu): 1.50%
4. Iron (as Fe): 4.00%
5. Magnesium (as Mg): 5.43%
6. Manganese (as Mn): 4.00%
7. Molybdenum (as Mo): 0.10%
8. Zinc (as Zn): 1.50%
9. Practical pH Stability Range: 4 – 9 (in aqueous solution)

 

Storage
Stored in a dry place, keep away from acid and oxidant, keep away from light and heat. Opened bags must be sealed properly.

Appearance: Green spray agglomerated microgranule.

State: Powder

Packing: 500gm Bag

Silicon Gold
Silicon Gold Image

Silicon Gold

100% Water Soluble Silicon Powder

Suitable for Vegetables, Fruits & All ornamentals
Silicon (Si) is an important element for plants, essential to good health. Silica is taken up and deposited in plant tissue, enhancing the plant tissue, enhancing the plant’s ability to deal with both biological and environmental stresses. This in turn benefits the grower by resulting in significantly increased yields.

After the plants absorbs the silicon, the cells form silicified cells which induce stem leaves stand firm, thereby will improve leaves photosynthesis, enhance pests and diseases resistance, enhance the ability of root oxidation, prevent root premature aging and decay, enhance plants lodging resistance.

Silicon Gold has overcome the traditional silicon fertilizer which is not easy to dissolve and difficult to absorb by plants. This product is quick dissolving, better absorption rate and utilization rate which is 80 times higher than the normal silicon fertilizer in the market. This is the first choice fertilizer to produce green, safe and healthy fruits and vegetables.

 

Benefits of Silicon Gold
• Non-toxic, pollution-free fertilizer
• The main elements required for plant growth
• Improved photosynthetic activity
• Promote growth and vigorous roots
• Increases uptake of water and nutrients from the soil
• Improve produces quality and prolong storage
• Structural strength for reducing lodging and pest attack
• Reduced drought and heat stress
• Increase crop yield


Silicon Gold suitable for what crop?
It is suitable for most field crops, vegetables, seedlings, fruit trees, flowers, drip irrigation, hydroponic, fertigation, aquaponics, green houses and nursery plants.


Typical Product Analysis
1. Nano Silicon plus special formulated ingredients ≥ 50.00%
2. pH: 6 – 7
3. Product of Hungary

 

Application rate
For foliar spray: 1 – 2g per 1L of water
Apply frequency: Weekly
For soil drenching: 4 – 5g ml per 1L of water
Apply frequency: Weekly

 

Precautions:
• Avoid mixing with strong acids, alkaline substances and oxidants.
• Avoid use under bright sun light.
• Sealed and keep in dry place at room temperature.
• Keep out of children reach.

Water Soluble Fertilizer 20-10-12
Water Soluble Fertilizer 20-10-12 Image

High Tower Granulation
100% Water Soluble Fertilizer
20 – 10 – 12

Suitable for Vegetables, Fruits & All ornamentals

Introduction
100% water soluble fertilizer containing all the three major plant nutrients such as Nitrogen (N), Phosphorus (P2O5) and Potassium (K2O). It is a quick acting and in high concentration product. Being readily soluble in water, water soluble fertilizer can achieve this by releasing essential NPK plant nutrients at the root zone from where they are readily absorbed and used elsewhere in the plant system.

 

Benefit of Water Soluble Fertilizer
• High water solubility, immediate availability of nutrients to plants
• Scientific formula, nutritionally balanced
• Supplies three major NPK nutrients in a single product
• Particle uniformity
• No filler used in the formulation
• Fast result due to fast nutrients availability
• Improve the produces quality
• Increase crop yield significantly
• Suitable for soil application, foliar spraying and drip irrigation

Suitable for
It is suitable for most field crops, vegetables, seedlings, fruit trees, flowers, drip irrigation, green Houses and nursery plants.

 

Product Typical Analysis
Product type: Compound NPK fertilizer
Production Method: High Tower Granulation
N – P2O5 – K2O Formula ratio: 20 – 10 – 12
Release Type: Quick
State: Granular fertilizer
Purity: 100%
Solubility: 100%
Colour: Off White
Granular size: 2 – 3 mm
Moisture content: < 2 %

Application Rate
Can be used as basal fertilizer, seed fertilizer or top & side-dressing application. In the drought, rainless area, practice deep placement.

1. Foliar application: 1g per 1L of water; Frequency: Weekly
2. Soil treatment: 100kg per acre
3. Potting plant: 5 – 10 g per pot; Frequency: Weekly
4. Fertigation: 1 – 1.5g per 1L of water. (For vegetative crop EC reading is between 1.40 ms/cm ~ 1.60; For fruit crop EC reading is between 1.40 ms/cm ~ 2.00)

Remarks;
Do not mix with fertilizers containing calcium and magnesium salts.

Packaging: 1 Kg per Bag

State: Granular

DTPA Fe 11% Image
DTPA Fe 11%
DTPA Fe 11% Suitable for Soil, Foliar, Hydroponics and Aquaponics DTPA chelated Iron / Fe is a DTPA chelating agents and divalent iron chelation formed a chelated iron fertilizer. Iron deficiency is a limiting factor of plant growth. Iron ... Read More
EDDHA Fe 6% Image
EDDHA Fe 6%
EDDHA Fe 6% Suitable for Soil, Foliar, Hydroponics and Aquaponics EDDHA Chelated Fe / Iron EDDHA is a strong chelating agent and with metal ions, together they form stable chelate salt. Compare with the DTPA and EDTA, ... Read More
EDTA Chelated Calcium Image
EDTA Chelated Calcium
EDTA Chelated Calcium Secondary Element Fertilizer Suitable for Vegetables, Fruits & All ornamentals Calcium exists a large number in leaves, normal concentration is around 0.2 – 1.0%. The physiologica... Read More
EDTA Fe 13% Image
EDTA Fe 13%
A soluble powder formulation of Iron Chelate (ethylene diamine tetracetate disodium salt) containing water soluble Fe of 13% w/w. This product contains water soluble iron in EDTA chelated form which provides iron nutrient essential for plant growth. Its use will prevent iron deficiency and it is ... Read More
EDTA Micronutrient Fertilizer Image
EDTA Micronutrient Fertilizer
EDTA Chelated Multi – Micronutrient (Trace Element) Fertilizer Characteristics and advantages EDTA Chelated micronutrients are important in agriculture because they are more readily utilized by plants than are inorganic forms of metals and they rem... Read More
Silicon Gold Image
Silicon Gold
Silicon Gold 100% Water Soluble Silicon Powder Suitable for Vegetables, Fruits & All ornamentals Silicon (Si) is an important element for plants, essential to good health. Silica is taken up and deposited... Read More
Water Soluble Fertilizer 20-10-12 Image
Water Soluble Fertilizer 20-10-12
High Tower Granulation 100% Water Soluble Fertilizer 20 – 10 – 12 Suitable for Vegetables, Fruits & All ornamentals Introduction 100% water soluble fertilizer cont... Read More